At the heart of these 1" coilover systems are a pair of specially tuned FOX 2.0 Performance Series IFP coilovers. The non-reservoir Fox 2.0 Performance Series coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment.They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, and a 5/8" hard chrome plated heat treated alloy shaft.
Also supplied as part of these complete 1" lift systems are a pair of BDS performance series upper control arms (UCA). These UCAs improve suspension travel and while providing superior strength and styling to the factory arms. These arms are built from 1.5" OD heavy wall tubing, fully welded with integrated support gussets. They include brake line mounting tabs and use an indexed ball joint cup to correct ball joint positioning back to the neutral position at ride height. The BDS arms come fully assembled with OE-style rubber bushings for the frame mounts and a high-quality ball joint for smooth, quiet operation and better durability than arms that use heims and uniballs. In the rear are a pair of specially tuned FOX 2.0 Performance Series IFP shocks designed to pair with the front coilovers for impressive performance on and offroad and to allow clearance for larger tires under Tacoma.
Get more out of your Tacoma with these 1" coilover systems from BDS Suspension.
Tire & Wheel Combinations
265/75/r16 w/ and back spacing
*Trimming may be required*
Est. Installation: 3-4 hours
Difficulty Level (easy 1 - 5 complicated): 2