These 6" performance coilover systems are based around the tried and true 6" IFS systems, adding FOX coilovers and shocks for improved ride quality, performance, and offroad capability. At the heart of these systems are the replacement FOX 2.5 factory series remote reservoir coilovers available with the optional DSC (dual speed compression) adjustment. These coilovers join together with the BDS high clearance system to correct suspension, steering, and driveline geometry for unmatched quality and performance. Up front the kits utilize a pair of 1/4" steel high clearance crossmembers, replacement ductile iron steeling knuckles and multipoint differential relocation system to create a solid subframe and retain ESC system compliance. Along with that a 3-piece skid plate system adds protection of vital drivetrain components and the front of this kit is rounded out with CV spacers, heavy duty tie rod ends, longer sway bar links, and brake line brackets.
In the rear this 6" lift system a pair of a 5" coil spacers are used to lift and level the stance. The rear track bar is repositioned with a heavy duty bracket and support brace to recenter the rear axle, while adjustable upper control arms correct pinion angle and add strength. Longer sway bar links and bump stop extensions along with a pair of FOX 2.0 IFP performance gas shocks to improve rear dampening in horse off-road conditions while offering smooth performance on road. This kit allows for up to 35x12.50 tires to be installed.
This kit is compatible with trucks equipped with factory cast steel, factory stamped steel, and factory aluminum control arms so be sure to verify your factory configuration before ordering
Tire & Wheel Combinations
33" x 12.50" w/17 x 8 and 4.5" back spacing
34" x 12.50" w/18 x 9 and 5" back spacing
35" x 12.50" w/20 x 9 and 5.75" back spacing
*Trimming may be required*
Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 4