Designed to not only lift, but enhance the new Wrangler JL's all around performance, these new 3" systems come complete and ready to perform right out of the box. At each corner replacement ProRide coil springs, 3" in front and 1.25" in rear to level the stance. These springs provide additional ride height, along with allowing for increased suspension travel. The rear springs are dual rate to improve load capacity. They are paired to your choice of specially tuned NX2-series gas or FOX 2.0 performance series IFP gas shocks to offer a smooth ride and better damping in rough terrain. Along with the new coil springs and gas shocks, these 3" kits include front and rear bump stop extensions to properly limit suspension up travel. A heavy duty, pinch-bolt style adjustable front track bar is utilized to recenter the front axle and eliminate any unwarrented side-to-side movement. Front caster correct is provided by a set of lower cam lock washers or upgrade to the available HD adjustable control arms for more strength and adjustability. JKS quicker disconnects are supplied with the kit to unlock the front suspension's potential to flex while maintaining quiet on road operation with a heavy duty adjustable design and spherical bushings. Along with the sway bar disconnects bolt-on mounting posts are supplied for each side to easily store the sway bar up out of the way when hitting the trail. In the rear extended length sway bar links are supplied to keep the sway bar at the optimal operating angle and allow more droop travel when paired with matching rear NX2-series or FOX 2.0 performance series shocks.
Tire & Wheel Combinations
33x12.50 w/17x8 and Stock back spacing
35x12.50 w/17x8 and 4.5-5" back spacing
37x12.50 w/17x8 and Stock back spacing
*Trimming may be required*
Est. Installation: 5-6 hours
Difficulty Level (easy 1 - 5 complicated): 3