Additional Images

BDS - 6" Suspension Lift Kit for 2019-2020 Chevrolet/GMC 4WD 1500 Series Silverado/Sierra 1/2 Ton Pickup W/O Magneride

746H
Based around the tried and true high clearance technology that has made BDS the go to for GM suspension lifts, these systems have been designed from the ground up to get the more out of your truck with the most ground clearance on the market. This 6" lift system brings you on road comfort, off-road capability and clearance for 35-37" tires. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality. Case in point the (NHTSA) National Highway Traffic Safety Administration's FMVSS No.126 compliance standards requiring any aftermarket modification to not adversely effect the vehicle's electronic stability control (ESC) system performance in the event of an evasive maneuver. These kits have been independently tested and certified compliant with these standards with up to 37" tires.

At the heart of this 6" system BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers to mount onto the factory strut assemblies. These allow for quick-simple installation without the need to disassemble the factory struts and retain the OE ride quality. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength.

In the rear of this 6" lift system, the factory block is replaced with a 5" lift block and longer u-bolts to lift and level the stance. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance gas shocks are supplied to round out the rear of these kits. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, FMVSS No.126 (ESC System) compliance certification and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Chevy/GMC 1500 truck with this 6" lift system from BDS Suspension.
Tire & Wheel Combinations
37" x 12.50" w/20 x 9 (Chevy) and 5.5" - 6.25" back spacing
35" x 12.50" w/20x9 (Chevy) and 4.5" - 5" back spacing
35" x 12.50" w/20 x 9 (GMC) and 4.5" - 6.25" back spacing

*Trimming may be required*
Was: $2,086.22
Sale: $1,981.90
Save: 5%
Save: $104.32

Customize Your Item

- Free BDS Sweatshirt Size: -
 * required
- Rear Shock Selection: -
 * required
Qty:
Free Shipping!

Description

Important Kit Notes
1. Requires frame bracket modification
2. Will not fit MagneRide / Adaptive Ride equipped models
3. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.
4. 17" Wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod.
5. All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition.
6. Will NOT work with TrailBoss or AT4 models.

Details

Shipping Information

  • Item Requires Shipping
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.